Multiple if then optimization

Results 1 to 36 of 36

Threaded View

  1. - 4th March 2008, 14:32 #29
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by Darrel Taylor View Post
    I'm not sure what you mean Alain.

    If the first value is > 10, it will just draw the bargraph like normal.
    It doesn't do anything until a serial byte is received.
    <br>
    Hi,Darrel

    What I ment is you initialize the LCD ... ONLY if the value is < 10 ... ( when writing TOO LOW )

    What if you stop the engine and start it again ??? ... first value will be > 10 , due to the exhaust gases still in the exhaust tubing ... and I do not see any LCDOUT $FE,1 in this figure.

    Alain
    Last edited by Acetronics2; - 4th March 2008 at 14:35.
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
« Previous Thread | Next Thread »

Similar Threads

  1. Multiple PICS from Same Crystal?
    By WOZZY-2010 in forum General
    Replies: 2
    Last Post: - 6th February 2010, 15:18
  2. Multiple analog inputs ?
    By rngd in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 25th February 2008, 15:13
  3. Multiple PIC programming
    By Nicholas in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 7th May 2007, 23:47
  4. Multiple PIC's with 1 crystal
    By puma in forum Schematics
    Replies: 11
    Last Post: - 20th March 2007, 17:02
  5. Multiple IR LEDs from 1 port using transistor
    By belpe123 in forum General
    Replies: 3
    Last Post: - 20th May 2005, 22:07

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules