Multiple if then optimization

[skimask]

What if you stop the engine and start it again ??? ... first value will be > 10 , due to the exhaust gases still in the exhaust tubing ... and I do not see any LCDOUT $FE,1 in this figure.
Alain

Exhaust gases might still be in the tubing, but I wonder how quickly the sensor will cool off and not make a decent output. In my experience, those things cool off fairly quick. But then again, the 3/4 wire ones heat up pretty fast too...

[Mugelpower]

Hi Guys,

now thats stuff I´m into ! Those lambda probes are reacting pretty fast when hot, about the whole scale from too lean to too rich in half a second . Reliable results will be in after about half a minute with a cold engine starting when using 4 wire probes, 2 minutes or more with one wire probes and those one wire probes without heating are useless for idle control, heats too low. You can see lots of hidden stuff like choke or accelerator pump work or fuel cutoff when stepping off the gas. Funny to watch but most times absolut neccessary for the first setup.