
Originally Posted by
mister_e
There's something bad in the schematic indeed. R3 have it's use... but not at the good place. Should be in serie with the transistor base. If you short it, you'll burn the transistor...
Anyways, i'll be back!
Hi, Steve
Did you notice a 1K resistor had magically appeared in series with the trans. base ??? ...
Strong coffee needed ... Malc is a one not so easy to follow !!!
The output schematic can be enough for this time ... let's see one problem at a time !!!
Inserting some PAUSE ( 100-200 ms ) between inputs pollings might do something interesting here ... let's try that first
Alain
Last edited by Acetronics2; - 16th February 2007 at 13:50.
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
Bookmarks