I had thought - should I be using "INT_INT" instead of "GPC_INT"? It is set up using GPIO.2 as the interrupt pin, which is the dedicated INT pin per the datasheet. Can you set up an interrupt on...
I have a project using three 12F683s controlled by a 16F883 master. The goal of the project is to track the RPM of 4 independant propellers on a quadcopter using an IR photodiode and emitter (i.e. a...
Where can the Darrel Taylor LCD_PCF8574A.pbp i2c lcd include be found?
This is the only forum I have ever been on, I am trying to learn how to navigate around. Thank you very much for pointing out...
#CONFIG
;cfg = _FOSC_INTOSCCLK ; INTOSC oscillator: I/O function on RA6/OSC2/CLKOUT pin, I/O function on RA7/OSC1/CLKIN do you really need clockout on RA6...
''This is as far as I have got. I know it is not much. I am having great dificulty in breaking down
'' the elements of the I2CWrite. I get a lit up display and that is all. Any help would be greatly...
Menu
Re: 12F683 interrupt on change improvement?
i would
richard Today, 23:52you are not using IOC correctly since the gpio is never read in the isr to clear the change condition
4.2.3 INTERRUPT-ON-CHANGE
Each of the GPIO pins is individually...