that make more sense to me now with further test, when the pin RA3
has nothing connected to it, the input is floating thus
when adding a pulldown it's...
Because when you configure RA3 to act as a normal input the MCLR signal is disconnected from the pin and instead connected to Vdd internally. In other words, it's not the PIN that's connected to Vdd...
answer found !
from thread: PBP or ASM?
I cannot speak for all flavors of basic or C, the biggest difference is going to be your time. Assembly requires many times more lines of code to be written...
Menu
Re: 16F690 MCLR as Input
many thanks Henrik to clarify this post.
jackberg1 Yesterday, 20:42that make more sense to me now with further test, when the pin RA3
has nothing connected to it, the input is floating thus
when adding a pulldown it's...