Hello Unregistered ,
If you want to increase trace/via capacity without increasing their size (maybe it complicates the rest of your circuit), just make more. https://i.imgur.com/DH51l19.png In my case, the 7805...
Thank a lot Richard. I'll give it a try :wink:
Here's the link for the video again. https://youtu.be/YlgEs6JWzTg Sorry, I'm not the YouTube expert so I hope it works now :o
Valuable source of info. Thanks for sharing, Ioannis
I found these web pages to better design my PCBs. Traces: https://www.mclpcb.com/blog/pcb-trace-width-vs-current-table/ Vias: ...
as has been pointed out many times, use the flash memory https://www.picbasic.co.uk/forum/showthread.php/24442-Effective-ways-for-storing-multiple-string-variables-within-PBP-code
try this 16 led strip on RC7 ' PIC 16F690 @20MHz #CONFIG __config _FCMEN_OFF &_IESO_OFF &_CPD_OFF &_WDT_OFF &_HS_OSC &_BOR_OFF &_CP_OFF &_PWRTE_OFF &_MCLRE_OFF #ENDCONFIG CLEAR TRISC...
the youtube link is a dud, but i take it that it works even though the timing is a little out of specs 9695
Here is a copy of the Richards example. '*************************************************************************** '* Name : ap102.pbp *...
Hello. In my code I have to store a lot of textual variables inside code memory. For example: if cvladi=1 then arraywrite botline, ["Rainbow "] if cvladi=2 then arraywrite botline,...
loop:
Re: Determining trace/via/wire current capability
If you want to increase trace/via capacity without increasing their size (maybe it complicates the rest of your circuit), just make more.
Demon Yesterday, 22:42https://i.imgur.com/DH51l19.png
In my case, the 7805...