PICBASIC PRO program displays to 3 x 7 segments LED display the result of pulse count on PORTA.4 pin/sec. Based on a 16F84A. Schematic included. Written by Steve Monfette counter.zip |
I can post here just fine. I see it opened.
Ioannis
What drives the MCLR pin of the slaves? A PIC output?
I am asking, because the MCLR pin needs a level of 0,2*Vdd to see LOW (for the 16F177x series, but I guess it is the same for others).
It...
test post to open a closed thread (I have a pending post)
can be deleted once another post is added (thread auto-closes if I remove this one)
I ended up with this design, using tri-state pin on master to reset all the slaves when required. This will not be used for programming the slaves, only resets.
9666
It's simple, uses a...
PICBASIC PRO program displays to 3 x 7 segments LED display the result of pulse count on PORTA.4 pin/sec. Based on a 16F84A. Schematic included. Written by Steve Monfette counter.zip |
Re: Resetting a slave from master mcu
you could do in software..... send out to one or all listeners a command to goto a restart routine like.... which "provides a way to execute a MCLR in software"
amgen Today, 23:14,
,
,
restarting:
@ RESET