Yep, I figured it probably have something to do with that.
Strange thing is that the code has been working fine with MCS for over 10 years but now it doesn't. So I've messed something up.
This could be due to your code and how the two terminals work. MCS will send the data when you click 'send', or when you hit 'Enter' if you have the transmit window setting 'Transmit on carriage...
MCP23017@400KHz , using a pic16 @32mhz can do that easily using mssp module
using I2CREAD command. @32 mHz the cmd will do 166KHz at best, even at 64 MHz it will not reach 400kHz
Published on - 13th May 2011 21:45
Number of Views: 6910
The attach zip contains a number of projects, the clock application is called "Clock_8_BIT_par_TFT.pbp" This project has a external RTC that can be set via USB with VB6.
There are a few other projects to drive this display including a SPI interface.
Disclaimer; I am not a programmer so my code may not be the most efficient.
Re: hserout issues on the 18F26K83
Yep, I figured it probably have something to do with that.
HenrikOlsson Today, 15:13Strange thing is that the code has been working fine with MCS for over 10 years but now it doesn't. So I've messed something up.