Menu
The attach zip contains a number of projects, the clock application is called "Clock_8_BIT_par_TFT.pbp" This project has a external RTC that can be set via USB with VB6.
There are a few other projects to drive this display including a SPI interface.
Disclaimer; I am not a programmer so my code may not be the most efficient.
Enjoy
Dave
Re: DT interrupt problem / K40 - "Priority State Not Found"
since ipr0 is not in access bank memory , that will not do what you think and may cause all sorts of buggy behavior
richard Today, 07:30also tmr0 interrupt is high priority at por so its an unnecessary step
as is ...