Hello.
Currently this "library" or whatever it is correctly called, has resolution of 8 bits, which can be somewhat limiting.
Is there a chance to "increase" resolution to 9 or 10 bits, or it has...
Your point about the fuse is very reasonable. But great part of the world on the wall plug does not have a mark about that (this is serious but this is how it is...).
you can believe that. i wont argue over quaint international power receptacles, i believe if the terminals are clearly marked line and neutral and there is a line fuse in the device then that is the...
I agree with Henrik. It will be dangerous to sell devices that depend on the connection of the plug since in Europe there is no way to know where is Live and where is Neutral.
Neutral and ground/earth are of course bonded here, in fact the incoming feed is usually 4-wire, three phases and a combined neutral/earth conductor (TN-C).
Again, there is absolutely NO WAY I...
really really bad advice
It really does matter how you connect 110V across the L & N connections if you live in a country that has a grounded neutral. while your device may function either way,...
Menu
Re: Increasing resolution of DTs MIBAM library?
It hsa to be done from scratch. Though I doubt it can be a general include file for any PIC chip.
Ioannis Today, 14:49Better use a chip with higher PWM resolution.
Ioannis