The Microchip name and logo
Published on - 23rd January 2011 10:22
The Microchip name and logo, PIC, dsPIC, KEELOQ, MPLAB, PICmicro, PICSTART, rfPIC and UNI/O are registered trademarks of Microchip Technology Inc. in the USA and other countries. Analog-for-the-Digital Age, Application Maestro, CodeGuard, dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, HI-TIDE, ICEPIC, ICSP, In-Circuit Serial Programming, Mindi, MiWi, MPASM, MPLAB Certified logo, MPLIB, MPLINK, mTouch, Omniscient Code Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, PIC32 logo, REAL ICE, rfLAB, Select Mode, Total Endurance, TSHARC, WiperLock, and ZENA are trademarks of Microchip Technology Inc. in the USA and other countries. All other trademarks are the property of their respective owners.
Re: Framing error if I disable transmitter after shift register is empty?
The USART section in the datasheet for your device will tell you if you should set/clear the TRIS bits for the TX/RX pins.
tumbleweed Today, 14:22If the chip supports open-drain mode then you just need to setup the TX pin...