Yep, I figured it probably have something to do with that.
Strange thing is that the code has been working fine with MCS for over 10 years but now it doesn't. So I've messed something up.
This could be due to your code and how the two terminals work. MCS will send the data when you click 'send', or when you hit 'Enter' if you have the transmit window setting 'Transmit on carriage...
MCP23017@400KHz , using a pic16 @32mhz can do that easily using mssp module
using I2CREAD command. @32 mHz the cmd will do 166KHz at best, even at 64 MHz it will not reach 400kHz
Published on - 5th December 2010 16:58
Number of Views: 8016
Hi,
Here's a short list of Frequently Asked Questions that should be of interest for most beginners. Don't hesitate to read them... they're not going to bite you
Re: hserout issues on the 18F26K83
Yep, I figured it probably have something to do with that.
HenrikOlsson Today, 15:13Strange thing is that the code has been working fine with MCS for over 10 years but now it doesn't. So I've messed something up.