loop: if portb.1=0 then 'here is switch 1 of the rotary encoder counter=counter+1 goto lcd endif if portb.0=0 then 'here is switch 2 of the rotary encoder counter=counter-1 goto lcd endif goto loop lcd: lcdout $fe,$c0,dec5 counter while (portb.0=0 or portb.1=0):pause 10:wend goto loop
Common of the encoder is Low and Pull Up is supposed to be active.
Ioannis
Reusing PGC & PGD pins
Do I have special considerations to take when I reuse ICSP pins?
Demon Today, 03:07Do I need a jumper during programming if I have a device connected, like a resistor/LED?
(I couldn't find any REUSE PGC/PGD/ICSP...