Hello Unregistered ,
Hello, thank you for visiting the picbasic users forum. Just a little note to remind you that, if your have registeted for a user account and you have not logged in and posted a message, unused accounts are deleted from time to time.
We track user account usage. As part of our general maintenaince and to meet the GDPR requirments, we have elected to delete user accounts that are unused.
We define unused as:
NOT haveing ever posted a message on the forum
AND
NOT having logged in for more than 360 days.
If you find that your account is deleted, because of inactivity, you will need to contact the forum administrator to have the account re-instated. email: [email protected]
100% 16f1847 work at 3,3v , I worked many time.
If the datasheet says it works on 3.3Volts there is no doubt that it will. Trust it. Ioannis
3.3v seems to be working well so far. I breadboarded the pic feeding into the PI uart.
Thanks. My ultimate goal is to interface a 16F1847 to a Raspberry PI 3B with RS485. The PI UART though needs 3.3v but I do see that the 16F1847 will work at 3.3V ? Can anyone verify that it...
Do this: On page 154 of the Pic Basic Reference Manual copy the DEFINES and test them to confirm that your circuit works as expected at 2400 baud. I know it is not exactly what you want but...
how are you off for socks and underpants ?
Hello Folks -- going to (hopefully) use a 16F1847 with HSEROUT. Always have used the software SEROUT before so this is new territory. To possibly save time, could someone tell me the commands to...
For now, here a my two test programs with 16F690 and 18F1220. Surprisingly (to me), both accept the STR length as variable in the 3 ways I'm using it (HSEROUT, SEROUT2 and DEBUG). I'll go back...
Re: 16f1847 hserout
100% 16f1847 work at 3,3v , I worked many time.
midali Yesterday, 23:22