'*** DT_INTS_14.pbp changed and renamed DT_INTS_16F1xxx.pbp (AND put in the right folder! ******************
'*** bottom 2 lines apply to program below...
With your suggestions I was able to get it working. I will post the basics in case someone else needs to get through this. Having a better understanding of PPS will help a lot moving forward and...
Look at command set:
https://www.itead.cc/wiki/Serial_Port_Bluetooth_Module_(Master/Slave)_:_HC-05
Be aware that there is several fw for HC-05. I have build programmer for them that worked on...
i agree, its not very clear which "mods" apply to which dt-ints version
a simple example adding 1 extra or modified dt-int to each version would be clearer
adding a swag of int sources you will...
I have been to http://http://dt.picbasic.co.uk/ a number of times to refresh myself, but I admit, I haven't mined it thoroughly. I went back and found a couple of nuggets. One was in "DT's other...
Published on - 5th December 2010 16:58
Number of Views: 4790
Hi,
Here's a short list of Frequently Asked Questions that should be of interest for most beginners. Don't hesitate to read them... they're not going to bite you
...
Menu
Re: PPS understanding on 16F15313
The IOC may not work. I had those in DT_INTS when I was trying to use that instead of CCP. I will have to go back and address that.
boroko Today, 02:14