Thanks... sorry I called you Chris before I saw "Chris" instead of "Cheers" hahaha Anyway thanks.... I've got to clean up the code yet and draw up the schematic. Hopefully I will have some time later...
an esp8266 server can be as simple as this, it reads the analogue pin every 20 sec once connected to a wifi net.
it responds with the last read value to a get request from anywhere. the requester...
Anyone have any suggestions for either an off the shelf solution or something with minimal development effort that will allow me to plug say 1 or 2 0-5V sensors into and allow me to bring up the...
Hi guys got it to work. I am using an H11AA1 to detect the zero cross on the INT pin of the 12F673. From there I am using pauseus to hold the output pin off for x amount of microseconds. After the...
Chris, I believe I understand your explanation I picture the diagram perfectly in my head no need for it and it makes perfect sense now. Let me give that a go. I am running at 60hz so my half cycle...
1 more quicky: so, if you chain 2 or more utilising the "open" state - I'm assuming that the open state is keeping them in high impedance mode when not transmitting - do you need a weak pullup or...
Published on - 23rd April 2010 19:39
Number of Views: 3364
1. How can I reference a BIT in a BYTE?
2. How can I reference a BIT in a WORD?
3. How can I reference a BIT in a BYTE ARRAY?
4. How can I reference a BIT in a WORD ARRAY?
5. How can I reference a BYTE in a WORD ARRAY?
...
Menu
Re: 12F683 Light Dimmer Problem
Thanks... sorry I called you Chris before I saw "Chris" instead of "Cheers" hahaha Anyway thanks.... I've got to clean up the code yet and draw up the schematic. Hopefully I will have some time later...
DavyJones - 3rd July 2020, 12:05