
Menuit works spasmodically theses days. [one more nail in pbp coffin]
i find it will work with edge or chrome , sometimes incognito window works better
...
The connection for this site is not secure
support.melabs.com uses an unsupported protocol.
ERR_SSL_VERSION_OR_CIPHER_MISMATCH
Tried different browsers/proxies/etc.
http://support.melabs.com/forum/picbasic-pro-compiler-3-0-and-later/working-code-examples/7062-example-code-for-using-pic-hardware-i2c
richard - 10th December 2025, 07:55
Hello.
I'm using DS3231, but I'm also running MIBAM on the same chip, so it screws up I2CREAD/I2CWRITE statements. Have anyone succeed with using MSSP for interacting with DS3231 ?
...and from the same supplier:
10028
Saint Thomas taps me on my shoulder!
10030
I'll go this way, thank you :wink:
flotulopex - 9th December 2025, 08:53
Again as always: R T Full M :D
flotulopex - 9th December 2025, 08:52
if you don't need instantaneous current sensing but can react within 10 or 20 milliseconds..... you can 'filter' the output to DC with the circuit I posted and constantly take a few samples and scale...
amgen - 8th December 2025, 14:52
can't tell, the picture is too blurry to read properly but i see no reference to a resistor mentioned it the bits i can read
post a link to data sheet
edit
ps, found this so no resistance...


16F18446 - setting baudrate for HW EUSART
Hi All,
flotulopex Today, 17:54I had an example from Richard lately where he configured my 16F18446 HW serial's port.
I didn't pay that much attention to it...
Now that I'm looking closer on "how he did it", I...