Need to know the time - accurately for your next project?
The code below allows your PIC to log into a network timeserver and it (eventually) writes the time to a Dallas RTC (code not supplied).
The PIC checks the NET TIME every power-up and thereafter every 4 hours. If it doesn't make connection, it tries an alternate time server. If THAT doesn't work (after retries) it gives up and tries again 4 hours later. A Lantronix XPort handles the connection to the net.
...
Re: Hardware I2C
I tried to use above code with 24C32 and PIC16F887 but it does not works. It stuck on this loop: while SSPCON2.0 = 1 : wend
CuriousOne Today, 10:53Here's complete code:
...