Siemens c55 sms control help please

[skimask]

Hi,
Not working

How quickly can and/or does the phone respond after you send the: ["AT+CMGR=1",13,10]

[camolas]

Hi,

After de phone recived the AT+CMGR=1 command he gives very fast (1s at most) the
+CMGR: 1,,23
0791539126010000240C915391663921010000807070819341 400453FA1B0E

OK


Thanks for still caring

How quickly can and/or does the phone respond after you send the: ["AT+CMGR=1",13,10]

[skimask]

Hi,
After de phone recived the AT+CMGR=1 command he gives very fast (1s at most) the
+CMGR: 1,,23
0791539126010000240C915391663921010000807070819341 400453FA1B0E
OK
Thanks for still caring

Ok, so don't you think that by pausing for 1/2 second after sending the command, you might miss the incoming data, or at least maybe the beginning of it, thereby causing you to think you might not have gotten anything at all?

LOOP:                             
HSEROUT["at+cpms=",34,"SM",34,13] : PAUSE 500
HSEROUT ["AT+CMGR=1",13,10] : PAUSE 500

[camolas]

Hi,

Ive put HSEROUT["at+cpms=",34,"SM",34,13] and HSEROUT ["AT+CMGR=1",13,10] and them it give me error back, sow back to HSEROUT ["AT+CMGR=1",13,10]:PAUSE 500 and
HSEROUT["at+cpms=",34,"SM",34,13] : PAUSE 500 and then i thang the HSERIN 5000,POR,[WAIT("OK"),STR myarray\62] to HSERIN 500, .............. data came faster but keep looping
then to HSERIN 1000,............. same problem

Ok, so don't you think that by pausing for 1/2 second after sending the command, you might miss the incoming data, or at least maybe the beginning of it, thereby causing you to think you might not have gotten anything at all?

LOOP:                             
HSEROUT["at+cpms=",34,"SM",34,13] : PAUSE 500
HSEROUT ["AT+CMGR=1",13,10] : PAUSE 500

[skimask]

Ive put HSEROUT["at+cpms=",34,"SM",34,13] and HSEROUT ["AT+CMGR=1",13,10] and them it give me error back, sow back to HSEROUT ["AT+CMGR=1",13,10]:PAUSE 500 and HSEROUT["at+cpms=",34,"SM",34,13] : PAUSE 500 and then i thang the HSERIN 5000,POR,[WAIT("OK"),STR myarray\62] to HSERIN 500, .............. data came faster but keep looping then to HSERIN 1000,............. same problem

Just because I'm using l/c letters doesn't mean you have to change yours...

So what does your program look like now...

And again, if your phone responds inside of a second, usually faster, and you add in a pause after sending the command that will get a response, what's going to come first, the pause or the response? And are you going to miss it or not?

[Ioannis]

This is the last time I am going to state this: DON't use pause statements or ignore the responses of the serial devices. When you send a command ALWAYAS check for the response.-

Ioannis

[camolas]

Hi,

Let see if i get it.

LOOP:
HSEROUT["at+cpms=",34,"SM",34,13] : PAUSE 500
HSEROUT ["AT+CMGR=1",13,10] : PAUSE 500

Change to.

LOOP:
HSEROUT["at+cpms=",34,"SM",34,13]
HSERIN 5000, [WAIT("OK")]
HSEROUT ["AT+CMGR=1",13,10]
HSERIN 5000, [WAIT("OK")]


Is this what you ment?

Thanks for caring.