Siemens c55 sms control help please

[camolas]

On my searchs i find more info now i can send the sms from hterminal but not from the pic i read that "Hserout [20]" is the Ctrl+z end command but some thing is still missing for me i belave the problem must be on the sending command..... plz give ne some hellp.Thanks


Hserout ["at", 13]
Hserout ["at+cmgs=16", 13]
Hserout ["079153912601000011000c915391663921010000aa02ef35" ,13]
Hserout [20]

[Norbac]

Here is a section from my program to send a sms. I'm using a WAVECOM modem, but I think the AT commans are the same for all brands.

sms:
HSerout ["AT",13]
HSERIN 5000, SMS,[WAIT("OK")] ' wait for response ok for 5 seconds
HSerout ["AT+CMGF=1",13] 'Set Text Mode
HSERIN 5000, SMS,[WAIT("OK")] ' wait for response ok for 5 seconds
HSerout ["AT+CMGS=",str tel\14,13] ' dial the phone number
HSERIN 5000 , SMS, [WAIT(">")] 'wait for a response to send the message
HSerout ["Esto es solo una prueba",13] 'write the message
HSerout [26] 'exit message mode
Pause 500
GOTO ESPERA 'exit sms rutine

and it works great!!!!!!!

I hope it can help you

[camolas]

Hi,

thanks for caring, but de siemens c55 do not have text sms only pdu. I think i need in the pdu array some send command... like i have used in hterminal the ctrl+z.
(Mi problema esta en comandar la trama pdu)

Gracias

Thanks,

[Ioannis]

Hi Norbac. Are you sure it is working? After AT+CMGS= there is a need for " character. Maybe your module does not needed.

Here is an older post I gave as an example:

HSerout ["AT+CMGS=",34,your numbers here,34,13]
hserin 2000,noresp,[wait(">")]
HSerout ["your message here",26]
hSerin 5000,noresp,[wait("OK")]
LCDOut com,1,"Sent OK":Pause 1000
GoTo .....
noresp:
LCDOut com,1,"Message not sent...":Pause 1000
GoTo....

34 is " character
26 is Ctrl+Z character

To Camolas: find another mobile with text. PDU is difficult format. Does not worth it. You may find cheap phones and modules to try.

Ioannis

[Norbac]

You are rigth, according with the standard, the CMGS command needs a " for the phone number. But for some reason on my modem does not need it. I will change just to follow the standard.

Thanks for your feedback.

[camolas]

Hi,

Thanks for caring, i have one nokia 6230 but i have tried for one month to connect it to pc but no sucess then i moved to siemens c55 and made it. Can you please just tell me how i have to do (pbp code, because my pdu array works fine in pc connection) to end my pdu array and send the send command (ctrl+z) ??

Thanks

By by

Hi Norbac. Are you sure it is working? After AT+CMGS= there is a need for " character. Maybe your module does not needed.

Here is an older post I gave as an example:

HSerout ["AT+CMGS=",34,your numbers here,34,13]
hserin 2000,noresp,[wait(">")]
HSerout ["your message here",26]
hSerin 5000,noresp,[wait("OK")]
LCDOut com,1,"Sent OK":Pause 1000
GoTo .....
noresp:
LCDOut com,1,"Message not sent...":Pause 1000
GoTo....

34 is " character
26 is Ctrl+Z character

To Camolas: find another mobile with text. PDU is difficult format. Does not worth it. You may find cheap phones and modules to try.

Ioannis

[Ioannis]

I gave you the code. You even quoted to the reply. Please read carefully. The ctrl-Z is there. As for the PDU I cannot help you, sorry.

Ioannis

[camolas]

Hi,

The pdu is fine no problem, are this command lines ok?


Hserout ["at", 13]
Hserout ["at+cmgs=16", 13]
Hserout ["079153912601000011000c915391663921010000aa02ef35" ,13, 26]


Thanks for caring

I gave you the code. You even quoted to the reply. Please read carefully. The ctrl-Z is there. As for the PDU I cannot help you, sorry.

Ioannis

[Ioannis]

If you mean the syntax then yes, I don't see any problem, except the 13 on the last. Just remove it.

Ioannis