AT/PS2 Keybord - PIC Interface?

[sayzer]

Are you guys looking to emulate a PS/2 keyboard or get data from a PS/2 keyboard?

I have pure PBP code for both if you need it.

May I see the emulation code, then?
IF, of course, it is responding to the system commands ??


------------

[skimask]

May I see the emulation code, then?
IF, of course, it is responding to the system commands ??
------------

I second that commotion...no sense reinventing the wheel...
It's the responding back to the PC bit that gets me...

[sayzer]

I second that commotion...no sense reinventing the wheel...
It's the responding back to the PC bit that gets me...

Ski, I did not quite understand what you meant but,
PC (system) can terminate the communication while KB is sending data to it AND send system commands to it to have it do something; turn on/off status leds, resend last byte etc...

The thing is to detect this termination thingie during an active transmission.

This is what I meant.

[skimask]

Ski, I did not quite understand what you meant but,
PC (system) can terminate the communication while KB is sending data to it AND send system commands to it to have it do something; turn on/off status leds, resend last byte etc...
The thing is to detect this termination thingie during an active transmission.
This is what I meant.

Ok, I was talking about the initial comm's to the keyboard when the PC powers up. It's been discussed in a couple of other threads somewhere.

[mpardinho]

PJALM's

is possible upload the code?

i use http://www.picbasic.co.uk/forum/arch...hp/t-2736.html but not work leds

many thanks

[skimask]

http://www.picbasic.co.uk/forum/arch...hp/t-2736.html

Where have I seen that thread before? Guess I'll go to Post #1 and read through it again and try to figure it out. (i.e. endless loop)