Interfacing microcontroller into wifi module or wifi adapter...

[mackrackit]

kenruizal
The Evaluation Board is not needed. Just use a MAX232 to connect the iChip to a PC and use the free Config Utility. Save yourself the headache and some money.

[dhouston]

kenruizal
The Evaluation Board is not needed. Just use a MAX232 to connect the iChip to a PC and use the free Config Utility. Save yourself the headache and some money.

Or spend $10 for this USB-Serial adapter.

[dhouston]

Or spend $10 for this USB-Serial adapter.

Ooops - wrong link. I meant to link to this adapter.

[kenruizal]

Guys...i tried everything to get negotiate to distributor of connectone but i failed because of they require me of minimum order quantity of 50 pcs..huhuh..very harsh..but i will try the Rabbit Semiconductor 20-101-1309..i dont have any idea but if you ever try this let me know because theres no further information in there product so i need more information before buying this product..

[dhouston]

Datasheet for the Rabbit Semiconductor 20-101-1309

However, that has no application with PicBasic Pro nor even with a PIC as it includes its own microcontroller and is programmed in a dialect of C.

Where are you located? Mouser has branches worldwide so you may be able to find the ConnectOne device through one of those branches.

[kenruizal]

I am from philippines..I tried the mouser and avnet but they refuse because of delivery and minimum order sir..is there any ways?

[dhouston]

Then your best bet is the WIZ610wi which you can buy online from Wiznet directly for $35US.

It is through-hole but the pins are on 1.27mm centers so you cannot use it with a breadboard. To test with a PC, use the Sparkfun adapter I referenced earlier