ConnectOne's iWiFi MiniSocket module uses an on-board serial interface with your PIC chip. PIC chip uses SEROUT2 PICBASIC statments to send AT+i commands to the MiniSocket. One of the commands will set the MiniSocket up as its own web site on the internet via the iWiFi interface to a router that is connected to the internet. You can also use it as a LAN to FTP data to a web site and also to send emails via the iWiFi interface to the internet via the router. You can give it its own IP address or run it in DHCP mode where it gets assigned an IP by the WiFi router. Any other questions?