Beginner problems with 18F66J50

Closed Thread
Results 1 to 14 of 14

Hybrid View

  1. - 17th August 2010, 23:34 #1
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    COOL!

    Have you tried setting the configs in code space? Might be a work-around.
    http://www.picbasic.co.uk/forum/cont...o-your-Program
    Dave
    Always wear safety glasses while programming.
  2. - 18th August 2010, 03:36 #2
    Bruce's Avatar
    Bruce
    Bruce is offline Prolific Poster
    Join Date
    Jul 2003
    Posts
    2,405

    Did you find this post helpful? Yes | No

    Default

    Robert mentioned an important point about the protection diode - I would also take into consideration. It may work for a while, then just fail, if you don't add that diode. It's well worth the expense. Just FYI.
    Regards,

    -Bruce
    tech at rentron.com
    http://www.rentron.com
  3. - 18th August 2010, 15:13 #3
    prstein's Avatar
    prstein
    prstein is offline Member
    Join Date
    Feb 2010
    Location
    USA, New England
    Posts
    164

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by Bruce View Post
    Robert mentioned an important point about the protection diode - I would also take into consideration. It may work for a while, then just fail, if you don't add that diode. It's well worth the expense. Just FYI.
    I know better than to ignore advice from The Bruce! Consider it added.

    Best Regards,
    Paul
  4. - 18th August 2010, 15:12 #4
    prstein's Avatar
    prstein
    prstein is offline Member
    Join Date
    Feb 2010
    Location
    USA, New England
    Posts
    164

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by mackrackit View Post
    COOL!

    Have you tried setting the configs in code space? Might be a work-around.
    http://www.picbasic.co.uk/forum/cont...o-your-Program
    Thanks Dave. Now that I can start running with this project I will certainly do that.

    Best Regards,
    Paul
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules