Quote Originally Posted by mackrackit View Post
The drawing also only has half of the OSC connected. But I am sure that is only on the drawing...

Why not try just for fun, setting the configs not with the programmers software but in the *.inc or code space?

The settings in the *.inc straight from the install for this chip should have you running with a 20 OSC.

Then
DEFINE OSC 48
Me thinks.
Thanks for catching the error in the schematic, but as you surmised the resonator is indeed connected.

I don't alter the inc file because I have no luck figuring out what they should be, at least in this case. I'm happy to try most anything to get this to work...

I tried adding the define (and also several sets of configuration settings), with the same negative result.

Best Regards,
Paul