PICKIT2 - PBC Pro - PIC16F88 TROUBLE

[inventosrl]

Hello, I use this :

PICBASIC PRO(TM) Compiler 2.50
MPASM V.5.2
MPLAB 8.10.00.00
MicroCode Studio Plus ver. 3.0.0.5
Pickit2 Application Version : 2.55.01
Device File Version : 1.53.00
OS Firmware Version : 2.32.00

the first's line of code:

'************************************************* ***************
'* Name : CONTROl.BAS *
'* Author : Giorgio Rossi *
'* Notice : Copyright (c) 2008 Invento S.r.l. *
'* : All Rights Reserved *
'* Date : 02/12/2008 *
'* Version : 1.0 *
'* Notes : *
'* : *
'************************************************* ***************
@ __CONFIG _CONFIG1, _XT_OSC & _WDT_ON & _LVP_OFF & _CP_OFF & _MCLR_ON
INCLUDE "MODEDEFS.BAS"

----- snip

MicroCode Studio Plus Error :
Error [118] c:\invento\control.asm 469 : Overwriting previus address contents (2007)

Line [118] :
_MCSBankEnd EQU MCSByte5

Thanks
giorgio

[mackrackit]

See post #5

[inventosrl]

See post #5

Hello Dave, the same erron on pickit2

[mackrackit]

Here is your code with the configs added in. The PBP inc file has been commented out.
I even programmed a chip. I named the file "invent"

'************************************************* ***************
'* Name : CONTROLLER.BAS *
'* Author : Giorgio Rossi *
'* Notice : Copyright (c) 2008 Invento S.r.l. *
'* : All Rights Reserved *
'* Date : 26/11/2008 *
'* Version : 1.0 *
'* Notes : *
'* Chip : PIC16F88 *
'************************************************* ***************
Asm
    ERRORLEVEL -306
    ERRORLEVEL -205  
Endasm
INCLUDE "MODEDEFS.BAS"
@__CONFIG _CONFIG1, _CP_OFF & _CCP1_RB3 & _DEBUG_OFF & _WRT_PROTECT_OFF & _CPD_OFF & _LVP_OFF & _BODEN_OFF & _MCLR_OFF & _PWRTE_OFF & _WDT_OFF &_XT_OSC

TRISA = %00000001 'RA0 Input
TRISB = %00000000 'all PORTB output

ANSEL = %00000001'only porta.0 is analogue
ADCON1 = 7'right justify the result(top bits are read as zero)
CMCON = 7 'Turn off comparators


adval VAR BYTE
i var BYTE
RPM VAR BYTE

' Define ADCIN parameters
Define ADC_BITS 8 ' Set number of bits in result
Define ADC_CLOCK 3 ' Set clock source (3=rc)
Define ADC_SAMPLEUS 50 ' Set sampling time in uS
PAUSE 500

loop:
ADCIN 0,adval

serout PORTB.6,n2400, [$FE, 1]
serout PORTB.6,n2400, [$FE, 2, "pressione ", #adval]
serout PORTB.6,n2400, [$FE, $C0, "giri", #rpm]

IF adval < 90 THEN
HIGH PORTB.4
endif

IF adval > 120 THEN
LOW PORTB.4
endif

COUNT PORTA.2,250,RPM
for i = 1 to rpm
toggle PORTB.5
PAUSE 25
NEXT i
LOW PORTB.5
GOTO loop 'repeat

<img src="http://www.picbasic.co.uk/forum/attachment.php?attachmentid=3041&stc=1&d=122833886 7" />

[inventosrl]

Hi Dave,
thanks a lot

please send me the file, so I can try.

What's the first line in assebler?

giorgio

[inventosrl]

Hi Dave, I've look that you use MPASM,
please post me this file (16f88.inc)

thanks a lot

giorgio

[mackrackit]

The file in the previous post is complete, just copy paste.

Hi Dave, I've look that you use MPASM,

Yep, I do not use anything else.

please post me this file (16f88.inc)

This is what it looks like.

     NOLIST
    ifdef PM_USED
        LIST
        include 'M16F88.INC'	; PM header
        device  pic16F88, hs_osc, wdt_on, lvp_off, protect_off
        XALL
        NOLIST
    else
        LIST
        LIST p = 16F88, r = dec, w = -302
        INCLUDE "P16F88.INC"	; MPASM  Header
   ;     __config _CONFIG1, _HS_OSC & _WDT_ON & _LVP_OFF & _CP_OFF
        NOLIST
    endif
        LIST

The ASM stuff
-306
Stops this message

Crossing page boundary -- ensure page bits are set.

Not needed for your code, just habit

-205
Takes care of

Found directive in column 1.

This is just a warning, but it is irritating.

[Archangel]

Hello, I use this :

PICBASIC PRO(TM) Compiler 2.50
MPASM V.5.2
MPLAB 8.10.00.00
MicroCode Studio Plus ver. 3.0.0.5
Pickit2 Application Version : 2.55.01
Device File Version : 1.53.00
OS Firmware Version : 2.32.00

the first's line of code:

'************************************************* ***************
'* Name : CONTROl.BAS *
'* Author : Giorgio Rossi *
'* Notice : Copyright (c) 2008 Invento S.r.l. *
'* : All Rights Reserved *
'* Date : 02/12/2008 *
'* Version : 1.0 *
'* Notes : *
'* : *
'************************************************* ***************
@ __CONFIG _CONFIG1, _XT_OSC & _WDT_ON & _LVP_OFF & _CP_OFF & _MCLR_ON
INCLUDE "MODEDEFS.BAS"

----- snip

MicroCode Studio Plus Error :
Error [118] c:\invento\control.asm 469 : Overwriting previus address contents (2007)

Line [118] :
_MCSBankEnd EQU MCSByte5

Thanks
giorgio

in the file you listed, the one from PBP 16f88.inc put a semicolon before this line, "<b> ;__config _CONFIG1, _XT_OSC & _WDT_ON & _LVP_OFF & _CP_OFF</b> " that will cure the overwriting error. I have put one in here.

[inventosrl]

in the file you listed, the one from PBP 16f88.inc put a semicolon before this line, "<b> ;__config _CONFIG1, _XT_OSC & _WDT_ON & _LVP_OFF & _CP_OFF</b> " that will cure the overwriting error. I have put one in here.

Hi Joe, don't work