18F2550 timing

[Darrel Taylor]

Like I said before, you can't run a 20Mhz xtal into the HSPLL!

18F2550 ... Sure you can.

Just need to setup the right divisors in the config's.
<br>

[skimask]

18F2550 ... Sure you can.

Just need to setup the right divisors in the config's.
<br>

There I am thinking about the '4685 again. Can't run 20Mhz into it and expect the PIC to run 80Mhz...
(and I was just about to go back and change it too)