How to setup pbp3 with MPLABX?

[Cyberdove]

Good luck getting any sort of help. MElabs and Mecanique seem to be too busy with other projects to support their legacy products. I recently purchased PBP Pro 3.0 and MCSP full version and am disappointed to find that MCSP particularly provides ZERO support.

[mpgmike]

Cyberdove, what are you doing to request assistance? I usually get prompt replies from emails, and Charles (at ME Labs) has shown generosity with his time on the phone. I have never attempted to utilize tech support from MCSP.

[Cyberdove]

Cyberdove, what are you doing to request assistance? I usually get prompt replies from emails, and Charles (at ME Labs) has shown generosity with his time on the phone. I have never attempted to utilize tech support from MCSP.

I used MCSP years ago and got prompt support directly from them. Now - nothing.

[Acetronics2]

Good luck getting any sort of help. MElabs and Mecanique seem to be too busy with other projects to support their legacy products. I recently purchased PBP Pro 3.0 and MCSP full version and am disappointed to find that MCSP particularly provides ZERO support.

the question could be ...

What's your problem ? Both are quite straightforward.

moreover MCPSX gives you a straight link to the Melabs Forum ( Where Charles Leo himself can help you ... ) ... so you just have to hit your HELP tab !!!

Alain

[mpgmike]

I'm getting hung up:

"3) Mark PBP Tool Chain and PicBasic Language Syntax"

PicBasic Language Syntax is not showing up as one of the options. Did find the PBP Tool Chain option.

[tumbleweed]

Those instructions are from a much older version of MPLABX. The Language Syntax plugin is no longer available.

A number of features no longer work the same way (if they work at all). Last time I tried it source level debugging was just about useless.

[richard]

Last time I tried it source level debugging was just about useless.

I agree , i'm heading back to mikro C for new projects . their latest update enables source level debugging for some of the newer chips ,finally!

[mpgmike]

So if I understand correctly, there is absolutely no advantage (debugging) to going through a massive ordeal to attempt to get PBP3 to work in the new MPLABX over the MicroStudio?!?

[Ioannis]

Hmm, source level debugging seems a distant dream for PBP.

But to be fair, the language syntax of PBP is much more straight forward than C so it is easier to debug and correct errors.

Still, debugging is on top of my wish list.

Ioannis

[richard]

I agree , i'm heading back to mikro C for new projects . their latest update enables source level debugging for some of the newer chips ,finally!

wrong [again] its almost if nobody wants anyone to be able to use 8 bit pic chips any longer .

the chips can be now compiled for and programmed but that's it , no icd support.

pic16f1619 is a no go for icd

[tumbleweed]

It's not entirely clear, but you might need the AC244066 Emulation Extension Pak to debug the 16F1619.