Easy HID Command -Response application

[aberco]

I'm in the same boat... it is possible to use Darrel interrupt routines with his new USB HID package, DT_HID260. It sort of replaces the USB_ASM_Service routine, and is very well designed.
Would love to do the same with CDC profile

[Mark J]

I'm in the same boat... it is possible to use Darrel interrupt routines with his new USB HID package, DT_HID260.
Would love to do the same with CDC profile

Hmm. Will have to look at the DT_HID as remember seeing it previously and completely forgot about it. Fingers crossed it'll sort some problems out etc.

[Mark J]

Phew, after a bit of headscratching ive got the DT_HID working with the DT_INTS-18 after having a bit of a fight with just getting the USB to recognise first (guess who used CLEAR in the wrong place LOL!!! )

Once I had the USB recognised, I simple added my own interupt as per usual with the INTS-18 and it worked.

One side effect with this is that in my main loop where the test counter i displayed was slow as it added 1 each cycle of the main loop is now racing along at a hell of a a faster rate wheras before it counted up at almost 1 per second. Not complaining though lol! as if this has kicked everything up a gear thats fine by me!

[Mark J]

Additional note to my post above on the super speed increase!

Just gone back to my project and noticed that I ONLY get the super speedy respones WHEN then USB cable is plugged in! as soon as I remove it you can see the counters on the LCD drop to an almost crawl on the updates so im now completely confused!