|
Hi, Alexander
at this time , I have my Easypic5 connected to MCSP in debug mode, with a 16F877A ... and it works fine.
so, it's possible.
1) I use a " true " RS232 serial cable from a serial port of the PC - no USB convertor. ( choice is only COM 1,2 & 4 ... )
I have an USB > serial on com 4 ( PSU ) and it works too, if connected to EP5 ...
2) the EP5 RS232 switches ( SW7 & SW8 ) must be selected to allow the choosen Pic to use it's own USART.
except that ... nothing special.
Alain
Last edited by Acetronics2; - 1st May 2010 at 13:34.
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks