Internal Oscillator and pull-up statements for 16f887

[Gusse]

I have never included fuses to PicBasic code, always modified INC-files.
Delete line from code and check that you have following line in 16F887.INC

__config _CONFIG1, _INTRC_OSC_NOCLKOUT & _WDT_OFF & _MCLRE_ON & _LVP_OFF & _CP_OFF

Comparators are off after Power On Reset (POR), so if you haven't enabled those, then they are disabled.

BR,
-Gusse-

[Dennis]

Thank you for the guidance and help !!

I have all set in the include file now! :-)

All is working just fine :-)

Kind regards

Dennis

[Gusse]

Nice to follow your project
Good Luck!

BR,
-Gusse-

[Dennis]

Cool thanks Gusse :-)

You can find more info here.

I need to first solve the TX/RX issue , then sort out the keystroke captures and then make it wireless :-)

Eventually I would like to try and make it an RF,IR remote. And maybe a little more added to it as time goes by ;-)


Well let's see how far I get with it ;-)

Kind regards

Dennis

[Archangel]

I have never included fuses to PicBasic code, always modified INC-files.
Delete line from code and check that you have following line in 16F887.INC

__config _CONFIG1, _INTRC_OSC_NOCLKOUT & _WDT_OFF & _MCLRE_ON & _LVP_OFF & _CP_OFF

Comparators are off after Power On Reset (POR), so if you haven't enabled those, then they are disabled.

BR,
-Gusse-

I never Fail to include them. To include the configs in your code, open the .inc file and install a semicolon just before the default config so,

__config _CONFIG1, _INTRC_OSC_NOCLKOUT & _WDT_OFF & _MCLRE_ON & _LVP_OFF & _CP_OFF

becomes

;__config _CONFIG1, _INTRC_OSC_NOCLKOUT & _WDT_OFF & _MCLRE_ON & _LVP_OFF & _CP_OFF

save it and start including them in your code without error. This way you can quickly adjust them, if you want to change something.

[Dennis]

Hi Joe

Thanks a million for the reply and advice :-) ,much appreciated !

Kind regards
Dennis