It does not look like you are setting the config correctly.
The thread that Joe and I pointed you to should have helped.

For now try going to the inc file for this chip in the PBP directory. Below is part of it.
If you are using PM for the assembler change
device pic12F683, intrc_osc_noclkout, wdt_on, mclr_on, protect_off
to
device pic12F683, hs_osc, wdt_on, mclr_on, protect_off

If you are using MPASM then change
__config _INTRC_OSC_NOCLKOUT & _WDT_ON & _MCLRE_ON & _CP_OFF
to
__config _HS_OSC & _WDT_ON & _MCLRE_ON & _CP_OFF

Code:
 device  pic12F683, intrc_osc_noclkout, wdt_on, mclr_on, protect_off

        XALL

        NOLIST

    else

        LIST

        LIST p = 12F683, r = dec, w = -302

        INCLUDE "P12F683.INC"	; MPASM  Header

        __config _INTRC_OSC_NOCLKOUT & _WDT_ON & _MCLRE_ON & _CP_OFF