Serial GLCD, how?

[mindthomas]

http://ww1.microchip.com/downloads/e...Doc/21952b.pdf

1st Google hit...

Thanks. But how to control a display with that!
But to you Mister_E - Yes, i will try parallel first, but how could i port that to serial?

Thanks for all your answers until now.

[skimask]

Thanks. But how to control a display with that!

Small steps...That's how you control a display with that.

From what I've read, you're trying to build a working Particle Accelerator with duct tape, 2x4's, a shovel, and 3 pounds of cat litter....and make it work on the first try......

Small steps....
Build something, get it working, build something onto that, get that working, integrate the two, and so on and so on...

[mister_e]

Yes, i will try parallel first, but how could i port that to serial?

Well, let's see. Once you have the parallel thing working, you'll know how the timing is implemented, and how the holly blue beast work... then it's just a matter to change some PORT read/write lines to SHIFTIN/SHIFTOUT statements.

Be warned... the GLCD refreshing will be slower... or way slower. I never tried any serial thingy until now.

New Compiler? Well i thought it was you here

No problem at all, i was just kidding a little bit!

[Acetronics2]

Hi, Steve

Don't you think MkB could have the looked-for code snippet ... ???

Regards from France

Alain

[mister_e]

Well that have it online on the product page.
http://www.mikroe.com/zip/adapters/s...d_examples.zip

Unless you're using their compiler, it's not going to help huh?

[Acetronics2]

I had a look to what could be done ...

But, as "minimal" code exceeds 2k ... license is needed just to watch the assembler, as their libraries are not 'readable' ...

LOL !

Our friend will have to code serially every GLCD Command ... and then write the full GLCD "user" sequence.
Good hair pulling sequence in sight !!!

Do you begin to understand how the 1 Page PbP + Custom libraries limit is a problem ???
Everything is to do by one's own ... here.

Alain

[mindthomas]

I had a look to what could be done ...

But, as "minimal" code exceeds 2k ... license is needed just to watch the assembler, as their libraries are not 'readable' ...

LOL !

Our friend will have to code serially every GLCD Command ... and then write the full GLCD "user" sequence.
Good hair pulling sequence in sight !!!

Do you begin to understand how the 1 Page PbP + Custom libraries limit is a problem ???
Everything is to do by one's own ... here.

Alain

Do you have a code, cause i have a licensed version of Pic Basic Pro??

[Acetronics2]

Thomas

You should be DUMB and BLIND ... no such code available "already cooked' aboard this forum ... we might know it !!!

Alain

[duncan303]

Do you have a code, cause i have a licensed version of Pic Basic Pro??

All the guys trying to help you out are doing so out of pure kindness and generosity, you might be (are) misinterpreting this.

The forum appears to have no association with MeLabs, if you have any feeling that you should be supported and have your code written for you, simply because you have purchased PBP then you should maybe think about emailing MeLabs and taking this matter up with them directly.

I sense that you are maybe a very young chap who wants to get a piece of kit going urgently so that you can place a demo on youtube, well there is nothing wrong with that at all. Any young person wanting to get into electronics has to be music to anybody's ears, and should be encouraged.

However.............................unless you manage to find either a benefactor/mentor, or you pay somebody, or (best choice) take it very slow and learn how to do it gradually yourself.....

its looking very much like your project simply just ain't going to happen mate.



________________________