http://ww1.microchip.com/downloads/e...Doc/21952b.pdfOriginally Posted by mindthomas
1st Google hit...
|
http://ww1.microchip.com/downloads/e...Doc/21952b.pdf
1st Google hit...
|
This device can be used in SPI mode. Page 8 of the above PDF show you how to process with.
Nice starter, is to compare a working code example and modify it for your need. The following is for 93LC56A EEPROMs
http://www.melabs.com/resources/samples/x1/pbp/mwx.bas
First i would suggest you to begin with parallel mode, then once you exactly know how your GLCD work, add the serial interface in between (after having done some tests with)
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
Thanks. But how to control a display with that!
But to you Mister_E - Yes, i will try parallel first, but how could i port that to serial?
Thanks for all your answers until now.
|
Small steps...That's how you control a display with that.
From what I've read, you're trying to build a working Particle Accelerator with duct tape, 2x4's, a shovel, and 3 pounds of cat litter....and make it work on the first try......
Small steps....
Build something, get it working, build something onto that, get that working, integrate the two, and so on and so on...
|
Well, let's see. Once you have the parallel thing working, you'll know how the timing is implemented, and how the holly blue beast work... then it's just a matter to change some PORT read/write lines to SHIFTIN/SHIFTOUT statements.
Be warned... the GLCD refreshing will be slower... or way slower. I never tried any serial thingy until now.
New Compiler? Well i thought it was you here
No problem at all, i was just kidding a little bit!
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
Hi, Steve
Don't you think MkB could have the looked-for code snippet ... ???
Regards from France
Alain
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
|
Well that have it online on the product page.
http://www.mikroe.com/zip/adapters/s...d_examples.zip
Unless you're using their compiler, it's not going to help huh?
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
I had a look to what could be done ...
But, as "minimal" code exceeds 2k ... license is needed just to watch the assembler, as their libraries are not 'readable' ...
LOL !
Our friend will have to code serially every GLCD Command ... and then write the full GLCD "user" sequence.
Good hair pulling sequence in sight !!!
Do you begin to understand how the 1 Page PbP + Custom libraries limit is a problem ???
Everything is to do by one's own ... here.
Alain
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
|
Do you have a code, cause i have a licensed version of Pic Basic Pro??
Members who have read this thread : 1You do not have permission to view the list of names.
Posting Permissions
Bookmarks