Serial GLCD, how?

[mindthomas]

Hi

I haven't been following your threads closely but thought you might like to take a look at these units from 4dsystems

www.4dsystems.com.au/prod.php?id=10

mix and match they are very easy to use... good support etc

worth a look maybe

Duncan

It's because i have bought a 128x64 GLCD KS0108 with TouchScreen: http://www.mikroe.com/en/tools/components/
But now i don't know how to write to the Display!

[duncan303]

whoooaa

I cut and pasted this

128x64 GLCD KS0108

into google uk home

and got this back as the very first hit


www.picbasic.co.uk/forum/showthread.php?t=2879

any use to you?

Trying to help

Duncan

can cats speed type reliably?

[mindthomas]

[QUOTE=duncan303;54401]whoooaa

I cut and pasted this



into google uk home

and got this back as the very first hit


www.picbasic.co.uk/forum/showthread.php?t=2879

any use to you?



Duncan

can cats speed type reliably?

Thanks, but it's for paralell GLCD's, as i have bought a serial connerter, it's that i'm asking about.
But else, thanks!!

[mister_e]

I think what Duncan's wanted to show you, is what you'll find at the bottom of the page... a PBP code example. They also explain few things as well.

http://www.compsys1.com/workbench/On...ontroller.html

OOOPs sorry... saw you asked for the serial code example... damn...

[mindthomas]

I think what Duncan's wanted to show you, is what you'll find at the bottom of the page... a PBP code example. They also explain few things as well.

http://www.compsys1.com/workbench/On...ontroller.html

OOOPs sorry... saw you asked for the serial code example... damn...

Ohh yes.
But aren't there anyone who knows the control commands for a MCP23S17 Serial->Parallel chip?

[skimask]

But aren't there anyone who knows the control commands for a MCP23S17 Serial->Parallel chip?

http://ww1.microchip.com/downloads/e...Doc/21952b.pdf

1st Google hit...

[mister_e]

This device can be used in SPI mode. Page 8 of the above PDF show you how to process with.

Nice starter, is to compare a working code example and modify it for your need. The following is for 93LC56A EEPROMs

http://www.melabs.com/resources/samples/x1/pbp/mwx.bas

First i would suggest you to begin with parallel mode, then once you exactly know how your GLCD work, add the serial interface in between (after having done some tests with)

[mindthomas]

http://ww1.microchip.com/downloads/e...Doc/21952b.pdf

1st Google hit...

Thanks. But how to control a display with that!
But to you Mister_E - Yes, i will try parallel first, but how could i port that to serial?

Thanks for all your answers until now.