USB PBPL Compile errors

[skimask]

I can make it compile fine in the USB18 sub-directory and move the compiled files out, it's a bit of a nuisance but at least it works.

Have you tried copying all of the relavent PBP files over to the project directory and compiling the source from there, instead of the other way 'round (i.e. what you're doing now but the other way 'round in reverse vice-versa upside-down inverted * -1 )?

[Rob]

Have you tried copying all of the relavent PBP files over to the project directory and compiling the source from there, instead of the other way 'round (i.e. what you're doing now but the other way 'round in reverse vice-versa upside-down inverted * -1 )?

I've got all the files listed in the USB18.txt in the project subdirectory: USB18.ASM, USB18MEM.ASM, USB18.INC, USBDESC.ASM and the project descriptor file and also the 18F4550.BAS file - see attached screen print. This configuration compiles with PBP 2.50a and previous versions, but not with PBPL.

Cheers

Rob

[mister_e]

Seems to miss a 18F4550.BAL file in your list.

[Rob]

Seems to miss a 18F4550.BAL file in your list.

Hi Mister_E,

that would be what the problem is then!!!

These files were generated by EasyHID but EasyHID was developed before PBPL came out and therefore it doesn't produce the ".bal" file.

Thanks very much for your help

Rob