USB PBPL Compile errors

[Rob]

From the USB.txt in the USB18 directory

Thanks,

I already had those files in my subdirectory. I have now replaced them with the files from PBP2.50 as they seem to be newer versions (I have kept copies of the old ones that were in the subdirectory just in case). Compiling with PBPL gives the same errors but without PBPL is still fine (although the generated code is now a couple of hundred bytes bigger).

Do you not get this problem?

Cheers

Rob

[mackrackit]

Do you not get this problem?

Well, no. I mostly use MPLAB. I do not know what PBPL is. Just thought it might have been the problem. sorry

[Rob]

Well, no. I mostly use MPLAB. I do not know what PBPL is. Just thought it might have been the problem. sorry

Sorry,

wasn't having a pop - I meant thanks for the reply. I just wondered if you had experienced this. PBPL is the compiler that comes with PBP 2.50 for compiling with "Long" variables.

Sorry for the misunderstanding there.

Rob

P.s. it does point towards what you have said as my code compiles fine with PBPL if I stick it in the USB18 folder with those files already in it

[Rob]

Hi,

I've still got this same problem and I'm just trying to work out if I'm the only person? I know a fair amount of people here are developing code with USB but I'm not sure how many people have upgraded to PBP 2.50. I'm just wondering whether to email Crownhill for support or not?

Cheers

Rob

[skimask]

I'm just wondering whether to email Crownhill for support or not?

You'd be better off email'ing MeLabs for help (since Crownhill is a reseller, not the maker), or just hanging out here until Mr.E gets on board.
Failing that, I'll give it a shot when I get home tonight, or at least sometime this weekend.
I haven't done any USB compiling lately, but I'll try to duplicate the problem and see what kicks it off...

[Rob]

You'd be better off email'ing MeLabs for help (since Crownhill is a reseller, not the maker)

doh - I meant MeLabs - thanks for pointing that out!

or just hanging out here until Mr.E gets on board.
Failing that, I'll give it a shot when I get home tonight, or at least sometime this weekend.
I haven't done any USB compiling lately, but I'll try to duplicate the problem and see what kicks it off...

if you get a chance to try it that'd be great! If not though, don't worry as I'm not in any hurry because I can make it compile fine in the USB18 sub-directory and move the compiled files out, it's a bit of a nuisance but at least it works. I'd like to find out what's causing it though; if it's just me or if it's something to do with PBPL.

Thanks very much

Rob

[skimask]

I can make it compile fine in the USB18 sub-directory and move the compiled files out, it's a bit of a nuisance but at least it works.

Have you tried copying all of the relavent PBP files over to the project directory and compiling the source from there, instead of the other way 'round (i.e. what you're doing now but the other way 'round in reverse vice-versa upside-down inverted * -1 )?