PBP 2.60 upgrade and 18F4550

Closed Thread
Results 1 to 11 of 11

Hybrid View

  1. - 30th November 2010, 04:22 #1
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    I can not reproduce your error here. My guess is when you changed the *.inc to use the internal OSC something else got changed?

    Post the configs .
    Dave
    Always wear safety glasses while programming.
  2. - 30th November 2010, 04:38 #2
    Darrel Taylor's Avatar
    Darrel Taylor
    Darrel Taylor is offline Fanatical Contributor
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959

    Did you find this post helpful? Yes | No

    Default

    Several years ago, Microchip had erroneously called that bit _FCMEM_OFF_1H.
    I think mister-e pointed it out to me.

    You could ...
    1. Rename your config bit to that.
      The bit is in your c:\pbp\18F4550.INC file
       
    2. Correct the misspelled bit in Microchip's c:\program files\microchip\mpasm suite\P18F4550.inc file.
       
    3. Update MPLAB and it should go away.
      http://www.microchip.com/stellent/id...&part=SW007002

    If someone has a PBP version prior to 2.60 ...
    Use this one instead ... (MPLAB V8.15a)
    http://melabs.com/support/mplab_old_versions.htm
    Last edited by Darrel Taylor; - 30th November 2010 at 07:21.
    DT
  3. - 1st December 2010, 00:08 #3
    Mike2545's Avatar
    Mike2545
    Mike2545 is offline Junior Member
    Join Date
    Jul 2009
    Location
    Ohio, USA
    Posts
    57

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by Darrel Taylor View Post
    Several years ago, Microchip had erroneously called that bit _FCMEM_OFF_1H.
    I think mister-e pointed it out to me.

    You could ...
    1. Rename your config bit to that.
      The bit is in your c:\pbp\18F4550.INC file
       
    2. Correct the misspelled bit in Microchip's c:\program files\microchip\mpasm suite\P18F4550.inc file.
       
    3. Update MPLAB and it should go away.
      http://www.microchip.com/stellent/id...&part=SW007002

    If someone has a PBP version prior to 2.60 ...
    Use this one instead ... (MPLAB V8.15a)
    http://melabs.com/support/mplab_old_versions.htm
    Ok...But rename it _FCMEM_OFF_1H. with an M or N?
  4. - 1st December 2010, 00:27 #4
    Mike2545's Avatar
    Mike2545
    Mike2545 is offline Junior Member
    Join Date
    Jul 2009
    Location
    Ohio, USA
    Posts
    57

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by mackrackit View Post
    I can not reproduce your error here. My guess is when you changed the *.inc to use the internal OSC something else got changed?

    Post the configs .
    Code:
    ;****************************************************************
;*  18F4550.INC                                                 *
;*                                                              *
;*  By        : Leonard Zerman, Jeff Schmoyer                   *
;*  Notice    : Copyright (c) 2009 microEngineering Labs, Inc.  *
;*              All Rights Reserved                             *
;*  Date      : 03/20/09                                        *
;*  Version   : 2.60                                            *
;*  Notes     :                                                 *
;****************************************************************
        NOLIST
    ifdef PM_USED
        LIST
        "Error: PM does not support this device.  Use MPASM."
        NOLIST
    else
        LIST
        LIST p = 18F4550, r = dec, w = -311, w = -230, f = inhx32
        INCLUDE "P18F4550.INC"	; MPASM  Header
        __CONFIG    _CONFIG1L, _PLLDIV_5_1L & _CPUDIV_OSC1_PLL2_1L & _USBDIV_2_1L
        __CONFIG    _CONFIG1H, _FOSC_HSPLL_HS_1H & _FCMEN_OFF_1H & _IESO_OFF_1H
        __CONFIG    _CONFIG2L, _PWRT_OFF_2L & _BOR_ON_2L & _BORV_3_2L & _VREGEN_ON_2L
        __CONFIG    _CONFIG2H, _WDT_ON_2H & _WDTPS_512_2H
        __CONFIG    _CONFIG3H, _CCP2MX_ON_3H & _PBADEN_OFF_3H & _LPT1OSC_OFF_3H & _MCLRE_ON_3H
        __CONFIG    _CONFIG4L, _STVREN_ON_4L & _LVP_OFF_4L & _ICPRT_OFF_4L & _XINST_OFF_4L
        NOLIST
    endif
        LIST
EEPROM_START	EQU	0F00000h
BLOCK_SIZE	EQU	32
  5. - 1st December 2010, 00:34 #5
    Mike2545's Avatar
    Mike2545
    Mike2545 is offline Junior Member
    Join Date
    Jul 2009
    Location
    Ohio, USA
    Posts
    57

    Did you find this post helpful? Yes | No

    Default

    Ok I changed them all to _FCMEN.

    Now my led does not blink anymore...but the error is gone!
  6. - 1st December 2010, 01:29 #6
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by Mike2545 View Post
    Ok I changed them all to _FCMEN.
    That is what you had ??
    Error[113] c:\pbp\18f4550.inc 21 : Symbol not previously defined (_FCMEN_OFF_1H)
    Now my led does not blink anymore...but the error is gone!
    You code appears that you want to use the internal OSC but the configs show an external.

    Try this
    _FOSC_INTOSC_HS_1H
    in place of
    _FOSC_HSPLL_HS_1H

    You can go to the MPASM Suite in program files\microchip, look at the *.inc file there to see all of the config options. Do not modify that file.
    Dave
    Always wear safety glasses while programming.
  7. - 1st December 2010, 02:41 #7
    Mike2545's Avatar
    Mike2545
    Mike2545 is offline Junior Member
    Join Date
    Jul 2009
    Location
    Ohio, USA
    Posts
    57

    Did you find this post helpful? Yes | No

    Default

    You code appears that you want to use the internal OSC but the configs show an external.

    Try this
    _FOSC_INTOSC_HS_1H
    in place of
    _FOSC_HSPLL_HS_1H

    You can go to the MPASM Suite in program files\microchip, look at the *.inc file there to see all of the config options. Do not modify that file.
    Thank a bunch...I changed the MPASM file back to FCMEM and made the PBP .INC to match, also set it to the internal OSC as you showed.
  8. - 1st December 2010, 03:02 #8
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    Are you up and running now?
    Dave
    Always wear safety glasses while programming.
  9. - 1st December 2010, 03:58 #9
    Mike2545's Avatar
    Mike2545
    Mike2545 is offline Junior Member
    Join Date
    Jul 2009
    Location
    Ohio, USA
    Posts
    57

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by mackrackit View Post
    Are you up and running now?
    Yes, I am...I also put in _FOSC_INTOSCIO_EC_1H so I can use PortA.6 as a digital I/O
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules