Adding TCP/IP Ethernet to PIC - how?

[flotulopex]

...You just need to then share that time with the machines on your LAN

YES... and NO.

The LAN is dedicated to a security CCTV and access control system. Time has to be "minute" accurate so I prefer to have a good time-base that will adjust the time once or twice a day or so.

NANO does NTP according to its datasheet. Nevertheless, I'll have a deeper look @ WIZ110SR. Actually, I could buy both...and try!

Thanks a lot for your advice... and experience too

[tiger_bel]

hoi,

fyi,

I am using always PBP for all projects except ... if ethernet applic. needed.
My son tested it and is quite easy if using basic 18F97J60 and
libraries from yo2lio 'www.microelemente.ro'

applications also with the ENC chip and smaller processors, webservers, videostreaming
it's a pain with PBP, with MB it all works..
sry

rgds

[l_gaminde]

YES... and NO.

The LAN is dedicated to a security CCTV and access control system. Time has to be "minute" accurate so I prefer to have a good time-base that will adjust the time once or twice a day or so.

NANO does NTP according to its datasheet. Nevertheless, I'll have a deeper look @ WIZ110SR. Actually, I could buy both...and try!

Thanks a lot for your advice... and experience too

Yes it does used this feature