Data Programming Error at 0000

[Darrel Taylor]

Can't see any reason off hand.

Something you might try is the latest version of meProg.exe
It works with the EPIC programmer, and has more options than EPICWIN.

Beta Software for EPIC™Programmer
http://www.melabs.com/support/progsoft.htm
<br>

[cpatnoi]

Darrel, thanks for your time and effort.

I just took a 16F628A off a production boards getting ready to ship. It had a different date code than the ones in the 2 tubes I had just received for prototyping. It worked like a champ. No problems. I should have done it 2 days ago, but I hate to touch production units. I have a call into my supplier.

I'm sorry for wasting your time.

Thanks
cpatnoi

[cpatnoi]

Something you might try is the latest version of meProg.exe
It works with the EPIC programmer, and has more options than EPICWIN.

Beta Software for EPIC™Programmer
http://www.melabs.com/support/progsoft.htm
<br>

I down loaded the beta software, installed it and set it up with MCS. It programmed the EEPROM area with no errors.

Many thanks Darrel,

cpatnoi