Fast / low resolution A/D conversion

Closed Thread
Results 1 to 8 of 8

Hybrid View

  1. - 7th April 2009, 11:03 #1
    AndrewC's Avatar
    AndrewC
    AndrewC is offline Member
    Join Date
    Feb 2006
    Location
    Brussels, Belgium
    Posts
    104

    Did you find this post helpful? Yes | No

    Default

    Or perhaps not looking in the right place. It doesn't refer to it in the device datasheet but does in the midrange manual.

    It's a pity you can't just stop the conversion after a certain number of bits.

    Anyway, thanks for pointing me in the right direction.

    Andrew
  2. - 7th April 2009, 12:18 #2
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Talking

    Quote Originally Posted by AndrewC View Post
    It doesn't refer to it in the device datasheet
    aha ???

    To calculate the minimum acquisition time, TACQ, see
    the PICmicro® Mid-Range MCU Family Reference
    Manual (DS33023).
    from the 16F87xa Datasheet ...

    LOL ... Everything always in the Holy Datasheet plus PbP Manual ...

    Ok, lots of reading ... but always useful !!!

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
« Previous Thread | Next Thread »

Similar Threads

  1. A/D conversion with PIC18F67J50
    By ScaleRobotics in forum mel PIC BASIC Pro
    Replies: 9
    Last Post: - 8th May 2009, 01:48
  2. Old and beyond help ?
    By DavidFMarks in forum mel PIC BASIC Pro
    Replies: 46
    Last Post: - 11th December 2008, 15:23
  3. A/D conversion problem in 18F2520, 2523, 2550 etc.
    By selimkara in forum mel PIC BASIC Pro
    Replies: 9
    Last Post: - 10th March 2008, 16:26
  4. A/D converter fails?
    By egberttheone in forum mel PIC BASIC Pro
    Replies: 14
    Last Post: - 13th February 2006, 18:57
  5. 4-line LCD Help - using PortA instead of B
    By Tom Gonser in forum mel PIC BASIC Pro
    Replies: 28
    Last Post: - 31st March 2005, 03:14

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules