Hi Fredrick,
Double check that your LCD ground is connected to the PIC Vss (5V common) securely.
Check that your LCD Plus is connected to the PIC Vdd (5V plus).
Also check resistor pullup on PIC MCLR to Vdd. as Skimask suggested.
-Adam-
Hi Fredrick,
Double check that your LCD ground is connected to the PIC Vss (5V common) securely.
Check that your LCD Plus is connected to the PIC Vdd (5V plus).
Also check resistor pullup on PIC MCLR to Vdd. as Skimask suggested.
-Adam-
Last edited by Pic_User; - 19th January 2008 at 03:59. Reason: added LCD plus line
Ohm it's not just a good idea... it's the LAW !
Bookmarks