newbie: 16F688 with COUNT & SEROUT

[ShortBus]

Thanks for the reply.

Can you recommend a particular timer? Also, why can't COUNT be directly utilized for this application?

[mister_e]

in your previous code, add a # sign before W1 and post your results.

SEROUT 0,N2400,["Hertz: ",#W1,13,10]

Count is not bad, but using a timer allow much flexibility, accuracy, and use less code space.

[skimask]

Thanks for the reply.

Can you recommend a particular timer? Also, why can't COUNT be directly utilized for this application?

You'll also be limited to about 50Khz at the input to the PIC if your PIC is running at 8Mhz.