DT_INTS for K42

[tumbleweed]

The DT_INTS-18_K42b.bas file from post #9 won't work.

[dtbarber]

The DT_INTS-18_K42b.bas file from post #9 won't work.

Thanks for the response. Do you know if the problem is with the DT_INTS-18_K2b file not being mapped properly to the PIC18F27K42 interrupt register, or is it that the PIC18F27K42 will not work with DT's Instant Interrupts? If it is a matter of correcting errors, I found the "How to make custom DT's Instant Interrupts" and can try an make the necessary edits.

[tumbleweed]

It's more than just a simple interrupt register issue. The asm instructions are wrong for the K42.

See posts #4 and #6.

[dtbarber]

Looks like crafting a working DT's Instant Interrupts for the PIC18F27K42 is well beyond my skill set. It may be time for me to learn to write ISRs using assembly language. In addition to the PBP3 reference manual discussion of Assembly Interrupts for PIC 18 Devices, can anyone suggest a good reference for someone who is not familiar with assembly language coding?

[mpgmike]

Although a bit dated, my first recommendation is "Applying PIC18 Microcontrollers", by Barry B. Brey; Copyright 2008 by Pearson Education. ISBN-13: 978-0-13-088546-3.

Another recommendation is "PIC Microcontrollers; An Introduction to Microelectronics", by Martin Bates; Copyright 2011 by Martin Bates. ISBN: 978-0-08-096911-4.

[dtbarber]

Thanks for the suggested references.

[tumbleweed]

Same problem in asm, so if you can figure out how an isr works you can do it in pbp as well