It just occurred to me that the really old PIC16F chips have an issue with the Vpp/MCLR voltage. As I recall, putting a 100 ohm resistor between the Vpp pin and the PICKit3 was a work-around.
|
Re: Pickit 3 failed to program
It just occurred to me that the really old PIC16F chips have an issue with the Vpp/MCLR voltage. As I recall, putting a 100 ohm resistor between the Vpp pin and the PICKit3 was a work-around.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks