Winstar OLED Display Problem with lcdout comands

[CuriousOne]

I've purchased that display from here: https://item.taobao.com/item.htm?id=552981000839
Bought parallel interface model, yellow color display. If you decide to order from here, please note, seller has no stock of green and red displays, but other colors are available. The yellow color of particular model actually has quite wide spectrum, which leans towards red more, than to green, so with proper color filter, without much loss of the brightness, it is possible to get either orange-red or lime-green display color from that module. If anyone into Rosco/Cinegel stuff, I can give numbers which give the best results.

These statements were obtained via "set this and try, let's see if it works" and they are in decimal, I'm using them without $ prefix.

[ChuckR]

I think I found the display you are using at http://www.yab-lcm.com/en/yb1602/113-415.html. If this your display, it appears not to be an OLED with a Winstar 0010 controller, but a backlit LCD with a SPLC780D1 controller (data sheet available at https://www.crystalfontz.com/control...ech/SPLC780D1/. Can you confirm?

[CuriousOne]

LOL are you joking?

This is amazingly fast OLED with WS0010 controller - it has switchable fonts, etc. all work just fine

[Ioannis]

I've purchased that display from here: https://item.taobao.com/item.htm?id=552981000839

Do you know chinese??

Ioannis

[CuriousOne]

A bit, why you asking?

[Ioannis]

because I could not find any english in that page you posted. Could not understand a word!

Ioannis

[CuriousOne]

You can use google translate to get the idea what is said there. But nothing much:

"Fully replaces 1602 LCD", operating temperature range -40+80C, module dimensions 80x36x10mm, display area 64.5 x 16 mm, available in different colors, can be SPI or traditional interface type, can be used either with 3.3 or 5V supplies, uses Winstar WS0010 compatible controller. and so on