Electro-hydraulic actuator

[Steve_88]

I have a few 1500 watt, 20 + vdc unidirectional transient voltage suppressors around. Sounds like these would do nicely?
Also, I'm having little luck finding suitable relays. I was hoping to stay away from the large can types. It seems most automotive types listed at Newark, Mouser, Digikey top out 40 to 50 amps.
I was hoping for a bit of a buffer, the actuator tops out at 50 maps. For my application I'm at the low end of the pressure range, it will be typically drawing around 20 amps.
Thanks

[Normnet]

I have a few 1500 watt, 20 + vdc unidirectional transient voltage suppressors around. Sounds like these would do nicely?
Also, I'm having little luck finding suitable relays. I was hoping to stay away from the large can types. It seems most automotive types listed at Newark, Mouser, Digikey top out 40 to 50 amps.
I was hoping for a bit of a buffer, the actuator tops out at 50 maps. For my application I'm at the low end of the pressure range, it will be typically drawing around 20 amps.
Thanks

See Grainger for contactors.


Norm