error

[HenrikOlsson]

TRISIO = %0000
GPIO = 0

Main:
GPIO.0 = 1
Pause 100
GPIO.0 = 0
Pause 100
Goto Main

Works here, with PBP2.60. I'm assembling with MPASM as I can't use PM on Win7.

Have you selected the correct PIC in the drop-down list in MCS?

/Henrik.

[LinkMTech]

Compiled good with PBP2.47 and MPASM using Henrik's sample.

[ruijc]

Greetings,

Thanks for the help.

I'm not being able to compile without these errors. Tryed MPASM and PM without success.

With Henrik's sample i also get these:
ERROR: RAM END must be defined.
ERROR: RAM BANKS must be defined.

I guess it's time to do some fomat c: :S

[malc-c]

TRISIO = %0000
GPIO = 0

Main:
GPIO.0 = 1
Pause 100
GPIO.0 = 0
Pause 100
Goto Main

Works here, with PBP2.60. I'm assembling with MPASM as I can't use PM on Win7.

/Henrik.

Compiles fine for me too ver2.60, with MpSAM 5.06 and Vista 32bit

[Darrel Taylor]

Try changing the file name to something other than the chips part number.

There is already a 10F206.bas file in the PBP folder that is loaded automatically during the compile.
But instead it will find your source code again.

hth,

[ruijc]

Thanks guys for all the help,

i've tryed everyting including your tips but i still get errors.

I belive it's something related with the pc it self. I will have to re-install everything.

Thanks again