3.5" Color LCD code example

[rsocor01]

With out a data sheet its a bit confusing at first. Unsoldered = 1 and soldered = 0, its because they use pull-up resistors.

Mark

Here it goes. This is the datasheet for the SSD2119 controller, which is what this display uses. The right PS combination is on page 28.

http://www.crystalfontz.com/controllers/SSD2119.pdf

[mark_s]

Here it goes. This is the datasheet for the SSD2119 controller, which is what this display uses. The right PS combination is on page 28.

http://www.crystalfontz.com/controllers/SSD2119.pdf

Thanks Robert,

I have the controller data sheet, I ment data for the development board. It does not come with any schematics or info. But the pcb is clearly silk screened. It has a lot of features for the money. DC to DC converter for vlcd, touch screen controller, SD card socket, pads for eeprom expansion. The best part, is you don't have to deal with the 0.5mm FFC cable connections.

@Dave,

Have not fired it up yet, need to change my pcb to 3.3v. Will report back when I get it
going with an interesting app.

Thanks

[DaveC3]

You can get the schematic and other data here http://cgi.ebay.com/3-5-TFT-LCD-Modu...ts_Supplies_ET

Scroll down to the "Download"

If you have any trouble finding it let me know and I will send it to you.

Dave

[mark_s]

You can get the schematic and other data here http://cgi.ebay.com/3-5-TFT-LCD-Modu...ts_Supplies_ET

Scroll down to the "Download"

If you have any trouble finding it let me know and I will send it to you.

Dave

Dave,

Thanks for the info! That guy is selling them for almost double. I ordered a second one for $35 in case that seller raises his prices or runs out. You can't build this for under a $100 in small quantities. Display $54 (Crystalfontz), PCBs $59 (expressPCB), chips, connectors etc. Unreal!

[DaveC3]

Yes, it is a real deal at $35 including shipping if you are willing to wait the two weeks delivery. For me it was well worth the wait. They have other displays even cheaper.

Dave

[cncmachineguy]

I agree also, its semms a steal. I ordered 3, received them all in good order and time. now to find a project for them, hmm....

[Ioannis]

Anyone done anything with this LCD yet? Mine is getting dust.

Ioannis