Simple RF remote control code

[kaos40]

Hi Bruce , thanks you by sharing I have question , I start in PIC No more than two months into this , is possible change PIC by PIC16F628A is only by availability in local trade I live in CHILE - South America . Thanks you Regards..

[kaos40]

Hi Bruce , thanks you by sharing I have question , I start in PIC No more than two months into this , is possible change PIC by PIC16F628A is only by availability in local trade I live in CHILE - South America . Thanks you Regards..

Sorry, do not read well in English, I just saw the PIC information exchange, I read the information 16F628A Thanks for sharing.

[Protech]

Hi bruce,

thanks for the code, but as I tried to compile it, I downloaded a trial version PBP I encountered problems "errors!".

I realised the code is Picbasic not Picbasicpro. I looked for Picbasic compiler here but I get the information:

Product 'PBC' is not available at this time!

I found the Proton Amicus18, no chance! The Pic12f635 is not included!

I looked again for another I found the Lite version but it seems to support Pic16f628 or so!

Can you help by providing me with the Hex data for the Encoder and the decoder?

Thanks in advance.

[Demon]

PBP v3 is available here:
http://melabs.com/

Bruce hasn't been here since 29th November 2012 06:54.

Robert

[Protech]

PBP v3 is available here:
http://melabs.com/

Bruce hasn't been here since 29th November 2012 06:54.

Robert

Well thanks a lot for the instant reply Robert, but the problem is that Bruce's code is written in PicBasic not PicBasicPro. I downloaded the Pro and as I encountered errors I realised the code is mere basic.
I don't know how many years or may be weeks it's going to take me to convert it to PBP, and that's why I recourse to Bruce for help.

[Demon]

I wouldn't wait for Bruce, you may wait a long time.

Take some pics and show us what errors you're getting. PIC Basic was a free version of PBP if I remember correctly, with a limit on code size. I don't remember a limit on features, but I've been wrong before.

What version of PIC Basic do you have? Are you still using PM assembler or now using MPASM?

Also post your code in case you made modifications.

Robert

[Protech]

I wouldn't wait for Bruce, you may wait a long time.

Take some pics and show us what errors you're getting. PIC Basic was a free version of PBP if I remember correctly, with a limit on code size. I don't remember a limit on features, but I've been wrong before.

What version of PIC Basic do you have? Are you still using PM assembler or now using MPASM?

Also post your code in case you made modifications.

Robert

Thanks again for the reply Robert.

I haven't undertaken any change I supposed the code works alright and I wanted to test at the outset, I thought I would take it as is if it is OK

I have downloaded and ran the PBP3, the latest! I simply wanted to compile Bruce's code into Hex data.

I supposed opening the code after saving it in a file, select the right device namely pic12f635, and click on compile would work!

here are the images of some errors